Back »

TSE ( Non-adjustable )

tse_bez_regulacji1.jpgtse_bez_regulacji2.jpg

Heating elements for water boilers of domestic and foreign manufacturers. These heating elements can be equipped with a Cotherm TSE thermostat adjusted specifically to their operation requirements.

General characteristics of heaters:

  • working environment: water.
  • electrical connection: F 6.3 connector provision for capillary thermostat connection
  • TSE (Cotherm)
  • supply voltage: 230V.
  • fastening method: R 5/4” orifice or flange 48

Material characteristics:

  • protective and capillary tubes: copper
  • orifice: brass
  • insulation: MgO (magnesium oxide)
  • coil: Kanthal wire
Type Length Electrical Parameters
U 5/4” 1500 W TSE 280 1500 W/230 V
U 5/4” 2000 W TSE 340 2000 W/230 V
U 5/4” 2500 W TSE 400 2500 W/230 V
B 5/4” 1500 W TSE 280 1500 W/230 V
U Fl. 1200 W TSE 280 1200 W/230 V
U Fl. 2000 W TSE 280 2000 W/230 V
B Fl. 2000 W TSE 280 2000 W/230 V

Typical models available

Heating elements designed to operate with a TSE thermostat

Symbols "U" and "B" indicate the shape of the heating element. U – U-shaped heater; B – U-shaped heater additionally bent downwards (similarly as in case of heaters with M14 sleeves).

B 5/4" 1500 W TSE 280 1500 W/230 V
U 5/4" 2000 W TSE 340 2000 W/230 V
U Fl. 1200 W TSE 280 1200 W/230 V
B Fl. 2000 W TSE 280 2000 W/230 V

If you'd like to order heaters or have any questions please fill the contact form below.

Fields marked * are required.