Back »

Technology and Accessories ( Technology and Accessories )

akcesoria_sl.jpg

In the production of tubular heating elements we apply Kanthal technology as well as Kanthal machines and wires.

Standard parameters

  • Wattage (depending on use)   from  50W up to 6 000W
  • Voltage                                     from  24V  to 600V
  • Tube diameters                        F 6,5 mm ; F 7,0 mm ; F 8,5 mm
  • Maximal length                         4 000 mm

Flanges and other accessories

The basicfixing elements for immersion heaters are threaded flanges  5/4" , 3/2" or 2" or threaded sleeves M14x1,5 or M10x1,25. They are used for liquids and also for air (gasses).

Typical flanges and sleeves

G 2" G 3/2" G 5/4"
threaded flanges

M10 x 1,25 M14 x 1,5

threaded sleeves

(Fig) Electrical terminals - connectors


Heater's bare electrode  Ø 2,2 mm


Male pin connector


Male angle double-pin connector


Angle pin connector


M4 thread connector + wire-clip and screw


Eye connector  Ø 4


  M6 screw connector


PVC or silicone insulated flexible copper cord

Flexible bare steel cord

On customer's request (e.g. for work in high humidity) electrical terminals can be hermetically protected.

If you'd like to order heaters or have any questions please fill the contact form below.

Fields marked * are required.